To Next PageTo Next Page
Need help?Do you have a question about the Ubiquiti NanoStation M5 and is the answer not in the manual?
General| Frequency | 5 GHz |
|---|---|
| Antenna Gain | 16 dBi |
| Throughput | 150+ Mbps |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Wireless Standards | 802.11a/n |
| Max. Power Consumption | 8 Watts |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Operating Humidity | 5 to 95% Non-Condensing |
| Antenna Type | Integrated Dual-Polarity |
| Networking Interface | 1 x 10/100 Ethernet Port |
| Memory | 8 MB Flash |
| Power Supply | 24V, 0.5A PoE Adapter |
| Operating Temperature | -30 to 75°C |
| Mounting | Pole Mounting Kit Included |
Lists devices, zip ties, PoE adapters, and power cords included in the package.
Lists devices, zip ties, PoE adapters, and power cords for locoM2/locoM5 models.
Emphasizes using shielded Category 5+ cabling with a drain wire for grounding.
Recommends using two ETH-SP surge protectors for outdoor installations.
Illustrates the setup with surge protectors and a switch for the NanoStation/locoM series.
Describes the function of the Power LED, Secondary Port, Main/LAN Port, and Reset Button.
Explains LAN2 LED, Signal LEDs, and reiterates Secondary/Main port functions.
Describes the functions of the Power LED, LAN1 LED, and Signal LEDs on the locoM9.
Describes the RP-SMA connector and the Main/LAN port on the locoM9.
Illustrates connecting the Ethernet cable to the device for installation.
Shows detailed diagrams for connecting the Ethernet cable during installation.
Shows how to mount the device using zip ties as part of the installation.
Shows how to adjust the position of the mounted device.
Warns that the switch port must comply with power specifications for connection.
Illustrates connecting via a switch or PoE adapter for accessing airOS.
Provides steps to verify connectivity and access the airOS interface.
Explains default login, agreeing to terms, and accessing the airOS interface.
Explains the purpose of antenna gain and output power fields for installers.
Details specifications for NSM5 and locoM series devices.
Specifies the operating frequency range for the locoM9 model.
Highlights warnings about submersion in water and use during electrical storms.
Details electrical safety requirements and precautions for the equipment.
Details compliance with FCC rules and regulations for the device.
Details ISED Canada, Australia, New Zealand, Brazil, and CE Marking compliance.
Discusses exposure limits and general safety advisories for radiation.
Provides notes on frequency band usage, power limits, and indoor use restrictions.
Mentions WEEE compliance, Declaration of Conformity, and available online resources.
