Rocket2AC Prism GPS Antenna Gigabit PoE (24V, 0.5A) with
Mounting Bracket
Power Cord
Package Contents
Installation Requirements
The GPS Antenna needs to have clear line of sight to the sky for proper GPS operation.
Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor
wired Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti.
For more details, visit
ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend that you
use two Ethernet Surge Protectors, model ETH-SP, one near the Rocket and the other at
the entry point to the building. The ETH-SP will absorb power surges and safely
discharge them into the ground.
R2AC-PRISM Quick Start Guide
To Next Page
Need help?
General
