Need help?Do you have a question about the Ubiquiti UniFi AC SHD and is the answer not in the manual?
General| Model | UAP-AC-SHD |
|---|---|
| Category | Wireless Access Point |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Operating Humidity | 5 to 95% non-condensing |
| Mounting | Wall/Ceiling |
| Supported Voltage Range | 44-57VDC |
| Max. Power Consumption | 20W |
| Wireless Standard | 802.11ac |
| Maximum Data Rate | 2.4 GHz: 800 Mbps, 5 GHz: 1733 Mbps |
| MIMO Technology | 4x4 |
| Ethernet Ports | 2 x Gigabit Ethernet |
| PoE Support | 802.3af/at |
| Security | WPA-PSK, WPA-Enterprise |
| Operating Temperature | -10 to 70°C |
| Data Rates | 802.11b/g/n/ac |
Lists all items included in the UniFi AP AC SHD package.
Specifies conditions and considerations for mounting the AP outdoors.
Lists necessary software and hardware for setup and operation.
Illustrates a typical network setup with UniFi devices and controllers.
Explains the meaning of different LED colors and patterns on the AP.
Details the dual functions of the reset button: restart and factory reset.
Describes the Main and Secondary Gigabit Ethernet ports and the USB 3C port.
Instructions for replacing an existing UAP-AC-PRO with the UAP-AC-SHD.
Step-by-step guide for mounting the UniFi AP on a wall.
Step-by-step guide for mounting the UniFi AP on a ceiling tile.
Instructions for attaching the AP to a suspended ceiling T-bar.
Guide for installing the AP using a junction or outlet box.
Details on how to connect the Ethernet cable to the AP's main port.
Instructions on powering the AP using a PoE+ compliant switch.
Steps to download, install, and log into the UniFi Controller software.
Information on using the UniFi mobile app for AP provisioning.
Guidelines regarding electrical safety and equipment servicing.
Outlines conditions under which the product warranty is voided.
Details the procedure for product returns and RMA requirements.
Legal text limiting Ubiquiti's liability for product use and performance.
Information on FCC rules and compliance for the device.
Details Canadian compliance standards (ICES-003, RSS) for the device.
Safety warning regarding RF exposure and antenna installation distance.
Explanation of the CE marking indicating product compliance with EU directives.
Information on environmentally responsible disposal of electronic waste.
To Next Page