Need help?Do you have a question about the Ubiquiti UniFi AP-AC PRO and is the answer not in the manual?
General| Wireless Standards | 802.11 a/b/g/n/ac |
|---|---|
| Frequency Bands | 2.4 GHz and 5 GHz |
| MIMO | 3x3 |
| Antenna Gain | 3 dBi (2.4 GHz), 3 dBi (5 GHz) |
| Weight | 350 g (12.3 oz) |
| Weight With Mounting Kits | 450 g (15.9 oz) |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Supported Voltage Range | 44-57VDC |
| Max. Power Consumption | 9W |
| BSSID | Up to 4 per radio |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
| Maximum Data Rate | 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz) |
| Ethernet Ports | 2 x 10/100/1000 Ethernet Ports |
| PoE Mode | 802.3af/at |
| Dimensions | Ø 196.7 x 35 mm (Ø 7.74 x 1.38") |
| Power Method | PoE |
| Max. TX Power | 22 dBm (2.4 GHz), 22 dBm (5 GHz) |
| Data Rates | 802.11ac: 6.5 to 1300 Mbps, 802.11n: 6.5 to 450 Mbps, 802.11a/g: 6 to 54 Mbps, 802.11b: 1 to 11 Mbps |
| Mounting | Wall/Ceiling |
Use a thin object to release the lock tab and remove the AP from the mounting plate.
Gigabit Ethernet port used for bridging network connections.
Provides functions for restarting the AP or restoring it to factory default settings.
The USB port is currently reserved for future use.
Gigabit Ethernet port for connecting power and the LAN/DHCP server.
To Next Page
