Need help?Do you have a question about the Ubiquiti UniFi UAP-AC-PRO and is the answer not in the manual?
General| Product Name | Ubiquiti UniFi UAP-AC-PRO |
|---|---|
| Category | Wireless Access Point |
| Wireless Standards | 802.11 a/b/g/n/ac |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Antenna Gain | 3 dBi (2.4 GHz), 3 dBi (5 GHz) |
| MIMO | 3x3 |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Maximum Power Consumption | 9W |
| BSSID | Up to 4 per Radio |
| Operating Temperature | -10 to 70°C (14 to 158°F) |
| Certifications | CE, FCC, IC |
| Antenna Type | Internal |
| Mounting | Wall/Ceiling |
| Management | UniFi Controller Software |
| VLAN Support | Yes |
| Guest Traffic Isolation | Yes |
| LED | Status LED |
| Max Data Rate | 450 Mbps (2.4 GHz) / 1300 Mbps (5 GHz) |
| PoE | 802.3af/802.3at |
| Dimensions | 196.7 x 196.7 x 35 mm |
| Weight | 350 g (12.3 oz) |
| Networking Interface | 10/100/1000 Ethernet |
| Antennas | 3 Dual-Band Antennas |
| Power Method | 802.3af/at PoE & 24V Passive PoE |
| Power Supply | 48V, 0.5A PoE Adapter (Included) |
| Maximum TX Power | 22 dBm |
| Operating Humidity | 5 to 95% Noncondensing |
| Data Rates | 802.11ac: 6.5 to 1300 Mbps, 802.11n: 6.5 to 450 Mbps, 802.11a/g: 6 to 54 Mbps, 802.11b: 1 to 11 Mbps |
| Warranty | 1 Year |
| Ports | 2 x Gigabit Ethernet |
Prerequisites and tools needed for installing the UniFi AP.
Step-by-step guide for mounting the UniFi AP to a wall.
Step-by-step guide for mounting the UniFi AP to a ceiling.
Description of the UniFi AP's physical components, ports, and features.
Methods to power the UniFi AP using PoE switch or adapter.
Instructions for downloading and installing the UniFi Controller software.
Important safety warnings, precautions, and electrical safety guidelines.
Information regarding the product's limited warranty and arbitration.
Details on FCC, ISED Canada, CE marking, WEEE, and conformity statements.
To Next Page
