Need help?Do you have a question about the Ubiquiti UniFi nanoHD UAP-nanoHD and is the answer not in the manual?
General| Model | UAP-nanoHD |
|---|---|
| Category | Wireless Access Point |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Power Method | 802.3af PoE, 802.3at PoE+ |
| Supported Voltage Range | 44-57VDC |
| Max. Power Consumption | 10.5W |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Mounting | Wall, Ceiling |
| Wireless Standards | 802.11a/b/g/n/ac |
| Maximum Data Rate | 2.4 GHz: 300 Mbps, 5 GHz: 1733 Mbps |
| MIMO | 2.4 GHz: 2x2, 5 GHz: 4x4 |
| Ethernet Ports | 1 x 1 Gbps |
| Max. TX Power | 2.4 GHz: 20 dBm, 5 GHz: 26 dBm |
| Operating Humidity | 5 to 95% non-condensing |
| BSSID | Per radio |
| Data Rates | 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) 802.11ac: 6.5 Mbps to 1.733 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80) |
| Dimensions | 160 x 160 x 34.2 mm (6.30 x 6.30 x 1.35 in) |
| Wireless Security | WPA-PSK, WPA-Enterprise |
Lists all items included in the UniFi nanoHD package.
Describes the function of the device's LED light.
Explains the locking tab for secure mounting.
How to connect the AP to a PoE-enabled switch.
Detailed steps for connecting the PoE adapter and power.
Optional guide for mounting the PoE adapter.
Specific guidance on electrical safety precautions.
Details the device's compliance with FCC regulations.
To Next Page