Need help?Do you have a question about the Ubiquiti UniFi UAP-FlexHD and is the answer not in the manual?
General| Model | UAP-FlexHD |
|---|---|
| Category | Wireless Access Point |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Antenna Gain 2.4 GHz | 3 dBi |
| Antenna Gain 5 GHz | 4 dBi |
| Supported Voltage Range | 44-57VDC |
| Networking Interface | 1 x 10/100/1000 Ethernet Port |
| BSSID | Up to 8 per Radio |
| Operating Humidity | 5 to 95% non-condensing |
| Wireless Standards | 802.11 a/b/g/n/ac |
| Antenna | Internal |
| Power Method | 802.3af PoE |
| Processor Specs | Quad-core |
| Memory | 256 MB |
| Wireless Security | WPA-PSK, WPA-Enterprise |
| Mounting | Wall |
| Wi-Fi Data Rates | 802.11b: 1, 2, 5.5, 11 Mbps; 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps; 802.11n: 6.5 to 300 Mbps (MCS0 - MCS15, HT 20/40); 802.11ac: 6.5 to 1733 Mbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80) |
| Management | UniFi Controller |
Details LED colors and their corresponding status meanings.
Describes Ethernet port and reset button functions.
Instructions for desktop installation.
Instructions for wall mounting the device.
Steps for installing using a ceiling mount.
Instructions for mounting the AP on a pole.
How to power the device using a PoE switch.
How to power the device using a PoE adapter.
Instructions for mounting the PoE adapter.
Guide to installing the UniFi Controller software.
Guide to installing and using the UniFi mobile app.
General safety warnings and precautions for using the device.
Specific guidelines for electrical safety and grounding.
Information about the product's warranty terms.
FCC and ISED Canada compliance statements.
EU declarations of conformity for radio equipment.
To Next Page