Need help?Do you have a question about the Ubiquiti UNIFI UAP-AC-IW-PRO and is the answer not in the manual?
General| Model | UAP-AC-IW-PRO |
|---|---|
| Category | Wireless Access Point |
| Frequency Bands | 2.4 GHz / 5 GHz |
| Ports | 1 |
| PoE Support | Yes |
| Supported Voltage Range | 44-57VDC |
| Max. Power Consumption | 9W |
| Mounting Type | Wall |
| Operating Temperature | -10 to 60° C (14 to 140° F) |
| VLAN | Yes |
| Advanced QoS | Yes |
| Guest Traffic Isolation | Yes |
| WMM | Yes |
| Concurrent Clients | 200+ |
| Dimensions | 86.5 x 86.5 x 36.5 mm |
| Weight | 250 g |
| Management | UniFi Controller |
| Wireless Standard | 802.11ac |
| Networking Interface | Ethernet |
| Power Method | PoE |
| Max. TX Power | 22 dBm |
| Antenna Gain | 3 dBi |
| Wireless Security | WPA |
| Mounting | Wall |
| Operating Humidity | 5 to 95% Noncondensing |
Details necessary components and tools for installation.
Outlines the network setup needed for the device.
How to access and log into the controller interface.
Information on using the UniFi mobile app for provisioning.
Information regarding electrical safety compliance and servicing.
To Next Page