Need help?Do you have a question about the Ubiquiti UniFi UAP-LR and is the answer not in the manual?
General| Wireless Standards | 802.11 b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Antenna Gain | 3 dBi |
| Range | 183 m (600 ft) |
| Ethernet Ports | 1 x 10/100 Ethernet Port |
| Power Method | Passive Power over Ethernet (12-24V) |
| Power Supply | 24V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 6 W |
| Maximum TX Power | 27 dBm |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications | CE, FCC, IC |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Antennas | 2 Integrated |
| BSSID | Up to 4 per Radio |
| Mounting | Wall/Ceiling |
| Operating Humidity | 5 to 80% Noncondensing |
| Dimensions | 200 x 200 x 36.5 mm |
Lists all items included in the UniFi Enterprise WiFi System package.
Specifies the necessary software and hardware for the UniFi Controller.
Outlines network prerequisites for UniFi AP deployment and management.
Describes the front panel and the meaning of the LED status indicators.
Details the rear panel, including the reset button and Ethernet port.
Step-by-step guide for physically installing the UniFi Access Point.
Instructions for wall-mounting and ceiling-mounting the UniFi AP.
Guide for installing the UniFi Controller software on Mac and PC.
Steps to set up the UniFi Controller, including network and guest settings.
How to launch and log in to the UniFi Controller application.
Introduces the main tabs within the UniFi software interface.
Describes general interface elements like Event Slider and Search.
Explains the Alerts window and managing recent events.
Details system-wide settings like name, country, and automatic upgrades.
Overview of settings sections: Guest Control, Wireless Networks, Blocked Devices, Admin, User Groups.
Configuration for guest portal, authentication methods, and policies.
How to change admin login, password, language, and email alerts.
Details No authentication, Simple Password, Hotspot, and External Portal Server.
Setting up wireless network name (SSID), security, and guest policies.
Explains WPA-Personal, WPA-Enterprise, and WEP key configuration.
Creating and managing user groups with bandwidth limits, and managing blocked devices.
Managing server version, backups, and support information.
Introduction to using maps for visualizing the wireless network.
Steps to upload and use custom floor plan images as maps.
Instructions for integrating Google Maps into the UniFi controller.
Guide to getting and entering the Google Maps API key.
How to drag and drop AP icons onto the map.
Explanation of AP icons (Lock, Details) and map display options (Show labels, coverage, topology).
Using Zoom Slider, Coverage, Topology, Map selection, and setting map scale.
Overview of key stats like Most Active AP/Client and All-time Top Client, and client distribution.
Visualizes client distribution on the most active Access Points.
Shows network traffic and client count over the last 24 hours or 30 days.
Details the information displayed for managed Access Points.
Explains statuses like Connected, Disconnected, Isolated, and actions like Restart/Locate.
How to adopt pending APs and upgrade firmware on devices.
Displays a list of users connected to the primary wireless network.
Information on user activity, uptime, and actions like block/reconnect.
Shows user activity levels, session uptime, and available actions.
Lists users connected to the guest network.
Information on guest status, IP address, and actions like block/unauthorize.
Displays guest activity levels, session uptime, and available actions.
Lists clients that were connected but are now offline.
Shows offline client data, last seen time, and filtering options.
Distinguishes between wired and wireless AP connections and their options.
Displays MAC address, model, version, IP, uptime, users, and guests for an AP.
Details for wired/wireless uplinks and downlinks, including signal and activity.
How to select and connect potential uplink Access Points wirelessly.
Explains the 'Isolated' state and how to recover an AP.
Details for APs managed by external controllers and the advanced adoption process.
Explains 'Pending Approval' state and how to remove an AP from management.
Overview of the details window tabs and available actions (Block, Reconnect).
Displays connection details, signal, rates, and activity for connected users.
Shows connection history and options to debug wireless connections.
Introduces the main tabs: Wireless Guests, Payments/Transactions, Vouchers, Operator Accounts.
Lists active guests, their package, status, and actions like disconnect/extend.
Details transaction info, voucher creation, and operator account management.
Steps to enable and configure custom portal pages for guest access.
How to access the default portal page and locate customization files.
Lists key HTML and CSS files for customizing the guest portal.
Instructions for starting the utility and overview of its interface.
Details on setting inform URL, rebooting, and resetting APs.
Technical specifications for the UniFi AP model.
Technical specifications for the UniFi AP Long-Range model.
Important safety instructions and electrical safety information.
Details the product warranty period, exclusions, and conditions.
Emphasizes professional installation and adherence to FCC/IC regulations.
RF exposure guidelines and CE marking compliance information.
Provides conformity statements in various languages as per Directive 1999/5/EC.
Contact details for support, online resources like wiki and forum.
To Next Page