Ubiquiti US-24 User Manual

Power Cord Rack-Mount Brackets (Qty. 2) Bracket Screws (Qty. 8)
Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Rubber Feet (Qty. 4)
Package Contents
US-24
OR
US-48
Installation Requirements
Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
For outdoor applications, shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through the AC ground of the power
supply.
We recommend that you protect your networks from harmful outdoor environments and
destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit: ui.com/toughcable
Note: Although the cabling can be located outdoors, the UniFi Switch itself should be
housed inside a protective enclosure.
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
US-24, US-48 Quick Start Guide

Ubiquiti US-24 Specifications

General

Model	US-24
Switching Capacity	52 Gbps
Forwarding Rate	38.69 Mpps
Power Supply	Internal
PoE Support	No
Mounting	Rack-Mountable
Total Non-Blocking Throughput	26 Gbps
Operating Temperature	0 to 40°C
Operating Humidity	10% to 90% non-condensing
Layer	2
Management Interface	Web UI, CLI
Ports	24 x Gigabit RJ45