Need help?Do you have a question about the Ubiquiti US-8-150W and is the answer not in the manual?
General| Total Non-Blocking Throughput | 10 Gbps |
|---|---|
| Max. Power Consumption | 150W |
| PoE+ IEEE 802.3at/af | Yes |
| Enclosure Characteristics | Metal |
| PoE Budget | 150W |
| PoE Out | 802.3af/at |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
| SFP Interfaces | 2 |
| Rackmount | Yes |
| Power Method | AC |
| Supported Voltage Range | 100-240VAC |
| Power Input | 100-240V AC, 50/60 Hz |
| PoE Interfaces | 8 |
| Ports | 8 x Gigabit RJ45 Ports 2 x Gigabit SFP Ports |
Instructions for connecting the power cord to the switch and a power outlet.
Guide for connecting the switch to the network and other devices via Ethernet.
Instructions for inserting SFP modules and connecting fiber optic cables.
Steps to download, install, and log into the UniFi Controller management interface.
Procedures for adopting the switch via the UniFi Controller dashboard and confirmation.
Navigating to the switch's settings and selecting the Ports tab for configuration.
Configuring port actions and selecting PoE mode (Off, 24V Passive, PoE+).
Details compliance, service, and power cord safety requirements.
To Next Page