Ubiquiti UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
1/15
Camera Tightening Tool Screw Anchors (Qty. 2)
Self-Tapping Screws (Qty. 2) Pole Mount Bracket Machine Screws (Qty. 2)
Package Contents
Installation Requirements
Pole-mounting: Two metal straps / hose clamps (not included)
Shielded Category 5 (or above) cabling with drain wire should be used for all
outdoor wired Ethernet connections and should be grounded through the AC
ground of the PoE.
We recommend that you protect your networks from harmful outdoor
environments and destructive ESD events with industrial-grade, shielded
Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend
that you use two Ethernet Surge Protectors, model ETH-SP, one near the
camera and the other at the entry point to the building. The ETH-SP will absorb
power surges and safely discharge them into the ground.
Hardware Overview
UVC-G3-PRO Quick Start Guide

Ubiquiti UVC-G3-PRO Specifications

General

Video Compression	H.264
Maximum Frame Rate	30 FPS
Microphone	Yes
Power Method	PoE (802.3af)
Max. Power Consumption	12.5W
Frame Rate	30 FPS
Weatherproof Rating	IP67
Memory	512 MB
Resolution	1920 x 1080
Image Settings	Brightness, Contrast, Saturation
Networking Interface	Ethernet (10/100/1000 Mbps)
Operating Temperature	-20 to 50° C (-4 to 122° F)
Operating Humidity	20 to 80% (non-condensing)
Certifications	FCC, IC, CE
IR Range	Up to 30 m
Day/Night	Yes
Mounting	Wall, ceiling
Management	UniFi Video