Ublox NINA-W1 Series User Manual

NINA-W1 series - User Manual
Software
2.1 NINA-W13 and NINA-W15 u-connectXpress software
NINA-W13/W15 stand-alone modules are delivered with embedded u-connectXpress software.
Using industry-standard AT commands, this is the software that manages the combination of
Bluetooth, Bluetooth low energy and Wi-Fi connectivity supported in NINA-W13 and NINA-W15
standalone modules, specifically:
 Wi-Fi (NINA-W13 and NINA-W15)
 Bluetooth (NINA-W15)
 Bluetooth low energy (NINA-W15)
For information about the features, capabilities and use of u-connectXpress software, see the u-blox
Short range modules AT commands manual.
Typical examples of the applications and use cases supported by NINA-W13 and NINA-W15 series
modules include:
 Gateway connection of Bluetooth low energy sensors to the cloud over Wi-Fi or Ethernet
 Bridge communication over serial, Wi-Fi, PPP, or Ethernet interfaces
 Wi-Fi hotspot connection using Local Area Network or Tethering
 Device configuration using Bluetooth or Wi-Fi connected smartphones
 Secure cloud connection using TLS and MQTT protocols
Figure shows the structure of the embedded u-connectXpress software delivered in NINA-W13 and
NINA-W15 standalone modules.
Figure 3: NINA-W13/W15u-connectXpress software structure

Ublox NINA-W1 Series Specifications

General

Brand	Ublox
Model	NINA-W1 Series
Category	Wireless Router
Language	English