NINA-W1 series - User Manual
Start the WiFiScan example, which is available at the following folder:
C:\Users\ user_name
\Documents\Arduino\hardware\espressif\esp32\libraries\WiFi\examples\WiFiScan
Press the “->” (arrow) button, as shown highlighted in red in the below screenshot (Figure ), to start
the upload to NINA-W10.
Figure 19: Screenshot that depicts the arrow at the top
Select "Serial Monitor" from the Tools menu as shown in Figure to view the events.
Figure 20: Screenshot that depicts selection of the “Serial Monitor”
The Wi-Fi scan starts and displays the results, as shown in Figure .
To Next Page
Loading...
