The transmitter will automatically find the best frequency to ensure a live video with good
quality of transmission. Please re-select the frequency from 5730MHZ to 5845MHZ to get
a better video transmission when necessary.
Pull the throttle stick to the lowest position and press the Elevator stick for 1.5 second to
enter into the MAIN MENU interface. Push the Elevator stick up/down to select “5.8G
Frequency”, push the stick to the right to enter into the “ 5.8G frequency” interface, select
a matched frequency.
Mode 2: Push the Throttle Stick to the right lowest corner, and move the Aileron Stick left
to right quickly, the 4 LED indicators will blink circularly, and the calibration is completed
when the indicators stop blinking.
Mode 1: Push the Throttle Stick to the right lowest corner, put the Aileron Stick to the
lowest and move it left to right quickly, the 4 LED indicators will blink circularly, and the
calibration is completed when the indicators stop blinking.
9.CALIBRATION
8.8 FREQUENCY SELECTABLE 5.8GHZ
18
©2015 Hubsan
哈博森科技 版权所有
0:08:49
MAIN MENU
5.8G FREQUENCE
Play Record
Set Real Time
Format SD Card
Set Reverse
Set Sensitive
5.8G Frequence
Exit
0:08:49
Exit
5810MHz
To Next Page
Loading...
Need help?
General
