07. Start the Robot and Set up the Network
Method 2: Place the battery onto the dock charger, and then
connect the power cord to the charge port of the dock
charger to charge the battery.
• Press and hold the button on the chest for 2-3 seconds and
release until the indicator is lit up in blue. The robot is
booted up after you hear a boot-up sound.
• Make sure that both the Bluetooth and Wi-Fi are enabled
on the smart devices. Open and log into the Yanshee APP,
and click the icon on the upper left of the home screen to
connect the robot and set up the network.
To Next Page
Loading...
Need help?
General
