REAR AND SIDE PANELS
• DVB-S2
Input for connection satellite antenna
• DVB-C/T2
Input for connection terrestrial antenna or cable provider
• SPDIF
Digital audio output
• AV
Composite AV output for TV-set connection
• RS232
For connection STB to PC (computer) via RS232 serial port
• HD OUT
HD OUT - high quality digital audio and video output
• ETHERNET
Ethernet network connection 1000Mbps
• USB ports: USB 3.0 (side panel) + USB 2.0a (rear panel)
Can be used to play media files, update software and work with WiFi / 3G dongles
• SD CARD
For MicroSD card
• CA card slot (side panel)
CA card reader
• ANT1 + ANT2
WiFi external antennas
• RECOVERY
For STB recovery mode
• DC-12V
Power socket. Attention! Can use only factory original 12 volts power adapter!
• POWER ON/OFF
Power switch