When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting until a
check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
either press the Back Arrow button on the touchscreen to
return to the previous menu, or press the “X” button on
the touchscreen to close out of the settings screen. Press-
ing the Up or Down Arrow button on the right side of the
screen will allow you to toggle up or down through the
available settings.
NOTE: Refer to “Uconnect Settings” in “Understanding
Your Instrument Panel” in the Owner’s Manual on the
www.fiatusa/en/owners/manuals
.
6
UCONNECT SETTINGS 45
To Next Page
Loading...
