EasyManua.ls Logo

Ude AX-309 - User Manual

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
- Output:
- Load impedance:
- Distortion:
- Dimensions:
- Maximum consumption:
- Weight:
- Colour:
- Presentation:
- Passing band:
- Power supply:
- Tone controls:
300 W. RMS at 1 KHz.
16 (L 70 V.).
33 (L 100 V.).
1%.
430x376x140 mm. (3 U).
600 VA.
19.8 Kgs.
Black.
epoxy / metal.
from 50 Hz. to 17 Khz.
230 VAC (50/60 Hz.).
at 100 Hz. 14 dB.
at 10 KHz. 13 dB.
W
W
4 configurable inputs, balanced microphone / auxiliary.
microphone:
sensitivity = 0,7 mV.
impedance = 200 to 600 .
voice equalisation filter = -15 dB at 100 Hz.
phantom alimentation = 12 VDC
1 auxiliary input (remote controlled modulation cut).
sensitivity= 190 mV
impedance= 47 K .
Direct signal input to mixer bus.
sensitivity = 500 mV
impedance = 600 .
Signal output.
level = 800 mV
impedance = 600 .
Insertion.
output = 400 mV / 600 .
input = 400 mV / 4700 .
4.
8.
300 W. RMS five-input power amplifier
with built-in mixer,
for professional audio applications.
-Microprocessor-controlled-
auxiliary:
sensitivity = 190 mV.
impedance = 47 K .
Insertion connector for external signal processors.
8 bits control microprocessor.
ON
MOD
OFF
ON
AUX-5 MIC/AUX-4 MIC/AUX-3 MIC/AUX-2 MIC/AUX-1
Digital
F
MASTER
4
3
2
1
5
6
7
8
AX-309
161
610.104A
MIXER AMPLIFIER DIGITAL
TECHNICAL CHARACTERISTICS
C/ LUIS I, 88, planta
28031 - MADRID
ESPAÑA
Tel: 34-91 311 60 76
Fax: 34-91 450 19 97
centro@udeaudio.com
Madrid
Delegation
Main
Office
Avda. BARCELONA, 24
08970 - SANT JOAN DESPÍ
BARCELONA - ESPAÑA
Tel: 34-93 477 28 54
Fax: 34-93 261 17 52
ude@udeaudio.com
UDE reserves the right to modify the technical characteristics of its products without previous notice
Question and Answer IconNeed help?

Do you have a question about the Ude AX-309 and is the answer not in the manual?

Summary

Technical Characteristics

Front Controls Overview

Rear Connections Overview

General Characteristics

Startup and Initial Setup

Input Configuration Jumper Settings

Connection Diagram and System Overview

Block Diagram

Installer Menu: Access and Password

Accessing the Installer Menu

Procedure to enter the installer menu using a password.

Changing the Installer Password

Steps to modify the password for installer menu access.

Installer Menu: Impedance and Recording

Manual Impedance Selection

Setting the load impedance manually for different speaker configurations.

Automatic Impedance Matching

Automatically adjusting impedance based on connected loudspeakers.

Installer Menu: Programme Management

Selecting Operating Mode

Switching between standard and programmed operating modes.

Warning Messages and Troubleshooting

Signal Saturation Warning

Explains the SAL message and how to resolve input signal overload.

Power Supply Warning

Details the ALI message, its causes (overheating, power anomaly), and solutions.

User Menu: Mode 1 (Standard Operation)

User Menu: Mode 2 (Programmed Operation)

Ude AX-309 Specifications

General IconGeneral
BrandUde
ModelAX-309
CategoryAmplifier
LanguageEnglish