Udirc UD1601 - Operational Guidance

10
2
Turn left
Go forward Go backward
Turn right
1>
2>
Operational guidance
Frequency matching
Manipulation method
Place the model on level ground
Consistent direction
Do not touch the
throttle trigger when
turning on thepower
of the transmitter.
Steering wheel
Throttle trigger Throttle trigger
Steering wheel
Turn on the power of
the transmitter, and
the red indicator light
will flash quickly.
After the car power is turned on, the transmitter and the car will carry out automatic frequency matching. When the
indicator light of the transmitter and the car lights are always on, the frequency matching is successful. In the process
of frequency matching, the car lights will flash rapidly. At this time, the gyroscope is being calibrated automatically.
Please place the car on the level ground to complete this operation. After calibration, the car lights return to normal.