Need help?Do you have a question about the UEi DM420 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Max Voltage (AC/DC) | 600V |
| Max Current (AC/DC) | 10A |
| Frequency Measurement | 10MHz |
| Temperature Measurement | -40°C to 1000°C |
| Battery Type | 9V |
| Continuity | Yes |
| Diode Test | Yes |
| Backlight | Yes |
| Auto Ranging | Yes |
| Data Hold | Yes |
| Min/Max | Yes |
| Relative Mode | Yes |
| Safety Rating | CAT III 600V |
| Display | LCD |
| Resistance Measurement | 40MΩ |
| Capacitance Measurement | 100μF |
| Weight | Approx. 300g |
Critical safety precautions and warnings for using the multimeter.
Explanation of symbols used on the multimeter and in the manual.
Identification and function of the multimeter's controls and display elements.
Step-by-step guide to measuring DC voltage using the multimeter.
Step-by-step guide to measuring AC voltage using the multimeter.
Procedure for measuring DC current, including connection and safety precautions.
Procedure for measuring AC current, including connection and safety precautions.
How to measure resistance and use the continuity buzzer function.
Steps for measuring capacitance, including safety precautions.
Instructions for using the audible continuity buzzer feature.
Procedure for testing diodes using the multimeter's diode test function.
Guidelines for maintaining the multimeter for long-term reliable service.
Instructions on how to properly clean the multimeter's case.
Steps for safely replacing the multimeter's battery.
Key technical data including operating temperature, humidity, and battery type.
To Next Page
