Need help?Do you have a question about the UEi DM505 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Max Voltage (AC) | 600V |
| Max Voltage (DC) | 600V |
| Max Current (AC) | 10A |
| Max Current (DC) | 10A |
| Resistance Measurement | Yes |
| Capacitance Measurement | Yes |
| Frequency Measurement | Yes |
| Temperature Measurement | Yes |
| Battery Type | 9V |
| Continuity Test | Yes |
| Diode Test | Yes |
| Display Digits | 4 |
| Display Counts | 4000 |
| Frequency Range | 10Hz to 10MHz |
| Temperature Range | -20°C to 1000°C |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Safety Rating | CAT III 600V |
| Operating Temperature | 0°C to 40°C |
| Current Range (AC) | 10A |
| Current Range (DC) | 10A |
| Capacitance Range | 40nF, 400nF, 4μF, 40μF, 100μF |
Details the procedure, ranges, accuracy, and safety for voltage measurements.
Explains how to measure resistance, including ranges, accuracy, and warnings.
Details the capacitance measurement function, ranges, accuracy, and safety precautions.
Specifies ranges, accuracy, and sensitivity for microamp measurements.
Details ranges, accuracy, and sensitivity for milliamp measurements.
Explains measurement of AC/DC current up to 10A, including overload protection.
To Next Page
