What to do if the CALCCLEAN indicator light doesn't turn off on my UFESA SPACE HYGIENIC Iron?
If the “CALCCLEAN” indicator light on your UFESA Iron does not turn off, restart and complete the iron descaling process.
What to do if dirt comes out of my UFESA SPACE HYGIENIC?
If dirt comes out through the soleplate of your UFESA Iron, it could be due to a build-up of limescale or minerals. In this case, you should carry out a cleaning cycle. Another reason may be that chemical products or additives have been used. Never add products to the water and clean the soleplate with a damp cloth.
Why is my UFESA SPACE HYGIENIC Iron not producing steam?
If your UFESA Iron isn't producing steam, it might be because the hose hasn't completely filled with water during the first use. To fix this, press and hold the steam release button until steam comes out. Alternatively, the “CALCCLEAN” indicator light may be flashing, indicating that the descaling process has not been completed. In this case, perform a cleaning cycle.
Why does my UFESA SPACE HYGIENIC make a pumping sound?
If your UFESA Iron is making a pumping sound, it is either because water is being pumped into the iron, which is normal, or the water tank is empty. If the tank is empty, fill it with water.
How to reduce steam coming out of UFESA Iron?
If too much steam is coming out of your UFESA Iron, the “Boost” mode may be turned on. To resolve this, activate the normal mode by pressing the “PROGRAM” button.
Why does my UFESA SPACE HYGIENIC smoke when I turn it on?
If your UFESA Iron begins to smoke when switched on for the first time, it is completely normal. Certain components on the appliance have been lightly greased at the factory and may produce a small amount of smoke when initially heated. This will stop after a short while.
Why does my UFESA SPACE HYGIENIC produce little steam?
If your UFESA Iron produces little steam, especially when recently switched on, it is normal. The iron produces steam gradually until it is stabilized.
To Next Page
General
