Ugin LECTRA PRESS - User Manual

INSTRUCTIONS FOT USE LECTRA PRESS
21
♦ CONTENTS♦
PAGE
TECHNICALS CHARACTERISTICS 22
INSTALLATION AND START UP 23
DESCRIPTION OF REAR PANEL 24
DESCRIPTION OF THE PROGRAMMING UNIT 25 to 30
PARAMETERS OF PORCELAIN FIRING 30-31-32-33
PARAMETERS OF A PRESSING PROGRAM 34
OPERATION OF A PRESSING PROGRAM 34-35
MAINTENANCE – GENERAL CARE – DECONTAMINATION 36
PROTECTIONS 37
SECONDARY PARAMETERS 38
TROUBLE SHOOTING 39
SILVER TEST 40

Summary

INSTALLATION AND START UP

INSTALLATION REQUIREMENTS

START UP PROCEDURE

Outlines the step-by-step procedure for powering on and initiating the furnace.

OPERATIONAL WARNINGS

PROGRAMMING UNIT OVERVIEW

PROGRAMMING UNIT LAYOUT AND KEYS

Explains the visual diagram, layout, and function of each key on the programming unit.

PROGRAMMING UNIT OPERATION

PROGRAM SELECTION AND OPERATION MODES

Explains the two phases of operation and program selection on the unit.

PROGRAMMING UNIT INTERFACE FUNCTIONS

PROGRAM NUMBER MANAGEMENT

FIRING PARAMETER DISPLAY

PROGRAMMING UNIT DISPLAYS AND CONTROLS

VACUUM, TEMPERATURE, AND TIME DISPLAYS

START AND STOP KEY FUNCTIONS

Explains the functions of the START and STOP keys for cycle control.

ADVANCED PROGRAMMING FUNCTIONS

CLEAR KEY AND DIGITAL KEYBOARD USAGE

Details how to use the CLEAR key and keyboard for programming.

FIRING PARAMETERS

PROGRAMMING AND PARAMETER SEARCH KEYS

Explains how to access program selection and search for parameters.

DEFINITION OF FIRING PARAMETERS

Details parameters like pre-drying temperature, platform lift, and heating rate.

FIRING PARAMETER DETAILS

VACUUM PARAMETER CONFIGURATION

Explains VACUUM START, LEVEL, STOP, and HOLD TIME settings.

TEMPERATURE HOLD TIME CONFIGURATION

Details FINAL TEMPERATURE and TEMPERATURE HOLD TIME settings.

PRESSING PROGRAM MANAGEMENT

CHANGING PROGRAM PARAMETERS

PRESSING PROGRAM SPECIFIC PARAMETERS

PRESSING PROGRAM EXECUTION

CALLING UP AND INITIATING PRESSING PROGRAMS

DESCRIPTION OF THE PRESSING CYCLE

MAINTENANCE AND GENERAL CARE

FURNACE MAINTENANCE PROCEDURES

PROTECTIONS AND FAILURES

OVERVOLTAGE AND POWER FLUCTUATION PROTECTION

POWER FAILURE HANDLING

TROUBLE SHOOTING

FAILURE CODES AND OPERATIONAL ACTIONS

Lists common error codes and the recommended actions for each malfunction.

Ugin LECTRA PRESS Specifications

General

Brand	Ugin
Model	LECTRA PRESS
Category	Furnace
Language	English