INSTRUCTIONS FOT USE LECTRA PRESS
22
♦ TECHNICAL CARACTERISTICS♦
Standby temperature 0 – 600°c
Pre-drying temperature 0 – 1000°c
Pre-drying time 0 – 30 min
Number of steps 6 ( Prog Ceram )
Internal Pre-drying 0 – 30 min (Prog. Ceram ) / 0 – 900°c ( Prog. Press )
Heat rise rate 0 – 200°c/min
Vacuum start 0 – 1000°c
Vacuum level 0 – 99% ( Prog. Ceram ) / 50 – 99% ( Prog. Press )
Vacuum stop 0 – 1200°c ( Prog. Ceram ) / 1250°c ( Prog. Press )
Final temperature 0 – 1200°c
Hold time 0 – 60 min
Internal cooling / Press 0 – 30 min
External cooling 0 – 30 min
Number of steps 6 ( Prog. Ceram )
Automatic standby cycle 0 – 60 min
DIMENSIONS
Height : 640 mm Power : 1200 W
Width : 420 mm Voltage : 115 or 230 V
Depth : 360 mm Frequency : 50/60 Hz
Weight : 23 Kgs
To Next Page