15
spare parts from the supplier.
6. 1 MAINTENANCE (TO BE
CARRIED OUT BY QUALIFIED
SERVICE PERSONNEL ONLY)
Montly: clean all internal components, primarily
the condenser, using compressed air, in order to
remove dust.
To clean these internal parts, unplug the unit.
Condenser fins are very sharp. Use extreme
caution when cleaning.
IMPORTANT
For maintenance use gloves that have at least a
degree of PL classes 0-4 (EN388).
ATTENTION
Check the correct position of the cables before
powering up the machine after replacing the
guard.
To Next Page
Loading...
