Need help?Do you have a question about the UGREEN CM400 and is the answer not in the manual?
Press the side with “PUSH” to push the tray out for installation.
Remove the pre-installed mounting screw before installing the M.2 SSD.
Secure the M.2 SSD with the provided mounting screw into the enclosure.
Slowly insert the gold fingers of the M.2 SSD into the M.2 slot.
Align the mounting screw with the fixing hole for securing the SSD.
Slide the drive tray back into the enclosure after SSD installation.
Connect the enclosure to the host device to ensure normal operation.
General| Model | CM400 |
|---|---|
| Data Transfer Rate | 10/100 Mbps |
| Button | Yes, for switching |
| LED Indicator | Yes |
| Speed | 10/100 Mbps |
To Next Page
