EasyManua.ls Logo

uher VARIOCORD 263 Stereo Service Manual

Default Icon
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Schutzgebühr
DM 5.-
Question and Answer IconNeed help?

Do you have a question about the uher VARIOCORD 263 Stereo and is the answer not in the manual?

uher VARIOCORD 263 Stereo Specifications

General IconGeneral
Signal-to-Noise Ratio50dB
InputsMicrophone, Line
OutputsLine, Headphones
Weight12 kg
ModelVARIOCORD 263 Stereo
CategoryRecording Equipment
TypeReel-to-Reel
Track System4-track stereo
Frequency Response30Hz to 18kHz
Wow and Flutter0.15%
Power Supply220V

Summary

1.0 Hinging the Recorder Out Of Its Case

1.1 Transport Mechanism

Details on the tape transport system, including speed selection and clutch operation.

1.3 Checking and Adjusting the Sensing Levers

1.4 Checking and Adjusting the Tape Tension Comparator

1.41 Checking

Measurement procedures for unwinding and winding tape tension.

1.42 Adjusting

Method for adjusting tape tension comparator springs for correct values.

1.5 Checking and Adjusting the Fast Forward and Rewind Functions

1.51 Checking the Fast Forward and Rewind Functions

Procedure to verify correct operation of fast forward and rewind.

1.52 Adjusting the Fast Forward/Rewind Control Lever

Adjusting the control lever for proper rest position.

1.6 Checking and Adiusting the Wind-On Clutch

1.61 Checking

Procedure to check the wind-on clutch's torque during operation.

1.62 Adjusting the Actuating Lug On the Actuating Lever

Adjusting the actuating lug on the lever for proper function.

1.7 Checking and Adjusting the Brakes

1.71 Checking

Verifying brake operation in different playback modes.

1.72 Adjusting

Adjusting the brakes for correct lifting distance.

1.9 Checking and Adjusting the Tape Speed Selector

2.1 Checking and Adjusting the Pressure Between the Pressure Roller and the Capstan

2.2 Checking and Adjusting the Pause Control

2.3 Checking and Adiusting the Tape Guides

2.5 Checking and Adiusting the Contact Spring Assemblies and Switches

2.7 Checking the Automatic Recording Level Control A 501

2.8 Checking the Automatic Recording level control A 502

2.9 Regulator Adjustment (Variocord 23/63/63 S/63 DIA)

2.92 RF Premagnetization

Adjusting RF premagnetization for optimal frequency response.

2.93 R 54 Balancing and R 55 Closed-circuit Current of the Final Stage

Balancing amplifier stages and setting quiescent current.

3.0 Technical Data

Related product manuals