UI NanoSwitch User Manual

NanoSwitch SelfTappingScrew MetalStraps(Qty.2)
PackageContents
InstallationRequirements
Mountingaccessoriesanddrainwirearenotincluded.
PoleMounting
Drillwitha4.5mmDrillBit
7mmSocketWrenchorScrewdriver
WallMounting
(2)Screws(≤5mmScrewHead)
(1)DrainWire,Optional(≤12AWG,≤1m)
Cables
ShieldedCategory5(orabove)cablingwithdrainwireshouldbeusedforall
wiredEthernetconnectionsandshouldbegroundedthroughtheACgroundof
thePoE.
Werecommendthatyouprotectyournetworksfromharmfuloutdoor
environmentsanddestructiveESDeventswithindustrialgrade,shielded
EthernetcablefromUbiquiti.Formoredetails,visit:ui.com/toughcable
Surgeprotectionshouldbeusedforalloutdoorinstallations.Werecommend
thatyouusetwoEthernetSurgeProtectors,modelETHSPG2,onenearthe
NSWandtheotherattheentrypointtothebuilding.TheETHSPG2will
absorbpowersurgesandsafelydischargethemintotheground.
NSWQuickStartGuide

UI NanoSwitch Specifications

General

Max Power Consumption	1.5W
Operating Humidity	5 to 95% Noncondensing
Certifications	CE, FCC, IC
Enclosure Characteristics	Plastic
Power Method	Passive PoE (Pairs 4, 5+; 7, 8 Return)

Summary

Installation Requirements

Pole-Mounting

Details required tools and steps for pole installation, including drill bit and socket wrench.

Wall-Mounting

Details required tools and steps for wall installation, including screw size and drain wire.

Cables

Specifies requirements for Ethernet cables, grounding, and surge protection for outdoor use.

Hardware Overview

Safety Warnings

PoE Voltage and Output Limits

Warns that PoE is always active and advises against exceeding 24W PoE output to prevent damage.

General Safety Notices

Advises reading instructions, using specified accessories, and avoiding water submersion or electrical storms.

Hardware Installation

Pole-Mounting Procedure

Wall-Mounting Procedure

Connecting Power and Ethernet

Connecting Power

Connecting Ethernet

Specifications

Compliance Information