13
Metal Target
Void Target
In the case of detecting a target:
A schematic representation will gradually ll with
yellow and red colors.
A change in the percentage and an increase in the
target’s chart indicator, accompanied by accelerated
sound.
In the case of detecting a void:
A schematic representation will gradually ll with green
and blue colors.
A change in the percentage and a decrease in the void’s
chart indicator, accompanied by accelerated sound.
To determine the target’s center, we take steps in the
four directions to obtain the strongest signal and the
highest percentage.
Note: To determine the target’s center, we take steps in the four
directions to obtain the strongest signal and the highest percentage.
To Next Page
Loading...