ujk technology Parf MK II - User Manual

Parf
®
MK II
Guide System
® Parf is a Registered Trademark of Peter Parfitt
Code 104779
Original Instructions
AT: 02/02/2023
BOOK REF: 104673
BOOK VERSION: 12
UK
02
FI
56
ES
20
NL
74
FR
11
IT
65
DE
29
NO
83
SV
38
DA
47
PL
92
PT
101

Summary

Introduction

PGS Identification of Parts

The Concept

Using the 3 mm Drill Guides

Explains how to use the 3mm drill guides for accurate hole placement.

Using the 3 mm Pins

Details the correct seating and usage of 3mm pins for accuracy.

Initial Pattern of 3 mm Holes

Completing the Pattern of 3 mm Holes

Completing the first column

Guides on drilling the remaining holes for the first and second columns.

Creating the bottom row

Instructions for drilling holes along a row using a Parf Stick.

Rows Next Method

Describes completing the pattern by finishing rows sequentially.

Columns Next Method

Describes completing the pattern by finishing columns sequentially.

Extending Rows Left and Right

Instructions for extending hole patterns left or right on a bench top.

Completing the remaining columns

Details on positioning and drilling Parf Sticks vertically for remaining columns.

Extra Large Bench Method

Method for creating large bench tops using triangular arrangements.

Creating Offset Holes

Enlarging the 3 mm Holes to 20 mm

The 20 mm Cutter

Describes the 20mm cutter and its 3mm spike for guiding.

The 20 mm Guide Block

Details on using the 20mm guide block for enlarging holes.

Useful Tips

Making a Track Saw Cutting Station

Guidance on creating a track saw cutting station with minimal 20mm holes.

Making an Isometric MFT3 Top

Method for creating an isometric pattern using triangular arrangements.

Squaring a Finished top to the Hole Pattern

Technique for ensuring hole patterns are parallel or square to bench top edges.

ujk technology Parf MK II Specifications

General

Brand	ujk technology
Model	Parf MK II
Category	Tools
Language	English