4
INSTALLATION
INSTRUCTIONS
WARNING: BEFORE ASSEMBLING THE
UNIT, MAKE SURE THE MAIN ON/OFF SWITCH
IS IN THE OFF POSITION AND THE UNIT IS NOT
PLUGGED IN.
ASSEMBLY
Step 1: Five adjustable feet are located at the bottom as
shown in Fig. A.
Fig. A
Step 2: Turn the feet counter-clockwise to increase the
height or clockwise direction to lower the height. Make
sure all feet are supported on the ground. See Fig. B.
Fig. B
After completely reading instructions, confirm that the main
switch is in the OFF position. Plug the unit into a 15 amp,
120 volt outlet.
OPERATION
Attach the power cord to the receptacle located at the
back of the unit.
Main switch: Turn the main
switch to “I” position. The
indicator light will be “ON”.
CONTROL PANEL
To Next Page
Loading...