EasyManua.ls Logo

ULTIMATE SPEED UPK 10 E2 - Page 17

ULTIMATE SPEED UPK 10 E2
285 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17GB/IE/NI/CY/MT
Note: The digital pressure gauge
with pressure display
6
of the
power bank with compressor
1
is not trade-approved. Therefore,
if inflatable items have been
pumped up, for which incorrect
pressure can be dangerous (e.g.
tyres), find a specialist unit with a
trade-approved device and check
the pressure of the inflatable item.
Tips for use
The device is not intended for con-
tinuous operation. The device was
designed to create air pressure –
not an air flow. Please do not use
the device for more than 7 minutes
at a time on items with a large
volume, to avoid overheating and
damage to the device. Then let
the device cool down for at least
15minutes. We recommend first
filling a large- volume item with air, in
order to then generate the required
pressure with the device. Do not use
the device for more than 7 minutes
at a time without stopping. Then let
the device cool down for at least
15minutes.
Air pressure test with
thepower bank with
compressor
Note: The digital pressure gauge
with pressure display
6
of the
power bank with compressor
1
is
not trade-approved.
Switch on the power bank with
compressor
1
by using the
switch for the power bank
9
.
Connect the inflatable item to the
compressed air hose
17
of the
power bank with compressor
1
,
whose pressure you want to
check. To do so, please proceed
as described in the section
“Connecting the compressed air
hose with a valve adapter or
“Connecting the compressed air
hose without a valve adapter.
Use the “M” menu button
5
to
select the desired unit of pres-
sure. The units available are bar
(“bar”), kilopascal (“KPa”),
kilogram per square centimetre
(“KG/CM²“) and pound per
square inch (“PSI”) (see Fig. E).
The digital pressure gauge
with pressure display
6
shows
the pressure of the connected
inflatable item in the preset unit.
Disconnect the inflatable item
from the compressed air hose
17
of the power bank with com-
pressor
1
. To do so, please pro-
ceed as described in the section
“Remove compressed air hose”.
Note: When disconnecting
the compressed air hose
17
, air
can escape from the valve of the
inflatable item. Ensure that you
remove the compressed air hose
17
as quickly as possible.

Table of Contents

Related product manuals