ULTIMATE SPEED UPK 10 E2 - Technical Specifications

9GB/IE/NI/CY/MT
z Technical specifications
The four individual cells used to
construct the rechargeable battery
are connected in series to produce
a total voltage of 4 × 3.2V ≈ 12V
and a capacity of 3500 mAh.
The battery output produced in this
way is the same as the output from
a rechargeable battery with a total
capacity of 14000 mAh at 3.2 V.
Model: UPK 10 E2
Battery type: Lithium iron
phosphate
Battery capacity: 14,000mAh,
3.2V
,
44.8Wh
Charge cycles: 2000
Charging time: up to 8 h
Peak current: 400A
Starting current: 200A
Operating
temperature: 0°C – 60°C
Voltage: 12V
Input voltage
(charging port): 5V
/2A
Output voltage
(USB port): 5V
/1A |
5V
/2A
Capacity: 8400mAh/5V
Current consumption: max. 10A
Maximum pressure
of the compressor
unit: 10bar
Maximum
achievable pressure: 3.5bar
Continuous
operation: max. 7min*
Air flow rate: 22l/min
Power supply:
Name or trade name of the
manufacturer, commercial register
number and address:
Manufacturer:
Dong Guan HP-Power Technology
Limited. Address: Room 103,
Building 1, No. 9 Hepan Road,
Tangxia Town, Donguan 523710,
Guangdong, China.
Importer:
C.M.C. GmbH
Address: Katharina-Loth-Straße 15,
66386 St. Ingbert, Germany
Saarbrücken local court,
HRB 15856
Model number:
HP12U-0502000-CEU
Input voltage:
100–240 V
Input alternating AC frequency:
50/60 Hz
Output voltage:
5.0 V
Output current:
2.0 A
Output power:
10.0 W
Average efficiency during operation:
79.493 %
Efficiency at low load:
76.241 %
Power consumption at zero load:
0.06 W