EasyManua.ls Logo

Ultra Start 42 SERIES User Manual

Default Icon
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER’S GUIDE
www.ultrastarters.com
Covers All 42xx and 43xx Series
Advanced 2-Way Remote Starter/Alarms
The system must be placed into Service Mode before any service work is started on the
vehicle. It is the sole responsibility of the vehicle owner to ensure that this is done. The
manufacturer accepts no liability or responsibility for accidental starting of the vehicle.
CARBON MONOXIDE - Never Start in an Enclosed Building (Garage, Carport etc...)
- The Hood Pin Safety Switch Must Always be Installed!
Warning!!
CARBON MONOXIDE MAY CAUSE SERIOUS INJURY, EVEN DEATH!
It is the sole responsibility of the user to place the system in Service Mode
when parking in an enclosed area ex: garage, partially enclosed area
ex: carport, or when the vehicle is being serviced.

Other manuals for Ultra Start 42 SERIES

Question and Answer IconNeed help?

Do you have a question about the Ultra Start 42 SERIES and is the answer not in the manual?

Ultra Start 42 SERIES Specifications

General IconGeneral
BrandUltra Start
Model42 SERIES
CategoryCar Alarm
LanguageEnglish

Summary

Product Introduction

Welcome Message

A greeting to the user and encouragement to read the manual thoroughly.

About Ultra Start

Information about the company's design philosophy and product development.

Feature List

A list of all the key features and functionalities of the system.

Safety

Important Safety Notes

Crucial warnings regarding carbon monoxide, transmitter handling, and vehicle servicing.

Remote Transmitters and Antenna

Remote Starter Functions

Basic Operations

Covers remote starting, stopping, and extending run time of the vehicle.

Engine Management Modes

Explains Idle Mode and Turbo Timer Mode for engine operation.

Reservation Mode

Auto Reservation Mode

Steps to set Reservation Mode for automatic transmission vehicles.

Manual Reservation Mode

Steps to set Reservation Mode for manual transmission vehicles.

Alarm Functions

Arming the System

Instructions on how to arm the vehicle's alarm system.

Constant Lock Feature

Details on locking doors and potentially controlling windows/sunroof.

Disarming the System

Procedure for disarming the alarm system remotely.

Silent Arm/Disarm

How to arm or disarm the system without audible siren chirps.

Optional Remote Features

Trunk Release

Instructions for opening the vehicle's trunk remotely.

Car Finder

How to locate the vehicle in a parking lot using the remote.

Panic Mode

Activation and deactivation procedure for the panic alarm feature.

Cold Start*/Timer Mode

Setting Cold Start*/Timer Mode

Step-by-step guide to activate timed or temperature-based engine starting.

Cancelling Cold Start*/Timer Mode

Procedures to deactivate the Cold Start*/Timer Mode.

Remote Transmitter Learn

System Service Mode (Valet Mode)

Entering Service Mode

Guide on how to disable remote start functions for servicing.

Exiting Service Mode

Instructions to re-enable remote start functions after servicing.

Service Mode Warning

Critical safety information regarding vehicle servicing with the system active.

LCD Display Explanation

Status Icons Overview

Explains icons like Antenna, Key, Siren, Trunk, Battery, and Timer.

Status Check Mode

How to check the system's current status via the remote's LCD.

LCD Display Icons & Features

Run Timer and Vehicle Icons

Details the Run Timer bar graph and icons for vehicle status.

Lock and Unlock Status

Icons indicating the locked or unlocked status of the vehicle's doors.

LCD Display Alerts

Trunk Opened Indicator

Icon displayed when the vehicle's trunk has been opened.

Alarm Trigger Icons

Icons showing alarm triggers from doors, hood, ignition, or shock sensor.

Setting the Clock

Programmable Icons

Timer and Telephone Icons

Icons related to Timer Mode and a non-functional Telephone Icon.

Key, Number, and Siren Icons

Icons indicating ignition status, car number, and siren activation.

Shock Sensor and Service Mode Icons

Icons for shock sensor status and system service mode.

Shock Sensor

Programming and Adjustment

Steps to program and adjust the sensitivity of the shock sensor.

Temporary Shock Sensor Bypass

Procedure to temporarily disable the shock sensor.

Diagnostics

Battery Replacement

Limited Lifetime Warranty

FCC Notice

Related product manuals