Ultra Start 606 Series User Manual

www.ultrastarters.com
FCC/ID Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the part responsible for compliance void the
user’s authority to operate this devise.
Advanced Remote Vehicle Security Systems
Rev. 2006.02

Ultra Start 606 Series Specifications

General

Remote Start	Yes
Keyless Entry	Yes
Number of Remotes	2
Remote Range	Up to 1, 500 feet
Voltage	12V DC
Siren Output	120dB
Alarm Features	Shock Sensor
Security Features	Starter Kill
Current Drain	15mA
Features	Remote Start, Keyless Entry, Alarm
Type	Car Alarm and Remote Start System

Summary

Alarm Functions

Arm System

Details the procedure to arm the vehicle security system using the remote transmitter.

Disarm System

Explains how to disarm the vehicle security system via the remote transmitter.

Priority Unlock Feature

Describes the optional feature to unlock only the driver's door first.

Silent Arm and Disarm

Provides instructions for arming and disarming the system without audible chirps.

Panic Mode

Details how to activate and deactivate the panic alarm function.

Ignition Auto Locks

Passive Arming

Starter Disable

Shock Sensor Programming/ Adjustment

Shock Sensor Programming/ Adjustment

Guide to entering and adjusting the shock sensor sensitivity levels.

Adjusting the Shock Sensor

Instructions on how to increase or decrease the shock sensor sensitivity.

LCD Display (660 & 670)

Remote Transmitters

Transmitter Programming

Step-by-step guide to programming new remote transmitters to the system.

Diagnostics

Diagnostic Chart

Table correlating siren chirps and LED flashes to system trigger causes.