Ultra Start 640 Series User Manual

WWW.ULTRASTARTERS.COM
FCC/ID Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the part responsible for compliance
void the user’s authority to operate this devise.
640 Series Advanced Remote Vehicle
Security System

Ultra Start 640 Series Specifications

General

Brand	Ultra Start
Model	640 Series
Category	Car Alarm
Language	English

Summary

Lock Doors and Arm Alarm

Locking and Arming Procedure

Steps to lock doors and arm the vehicle security system using the remote.

Unlock Doors and Disarm Alarm

Unlocking and Disarming Procedure

Steps to unlock doors and disarm the vehicle security system using the remote.

Panic Mode

Activating Panic Mode

Steps to activate panic mode for immediate alert and siren activation.

Disabling Panic Mode

How to deactivate panic mode using the remote's LOCK or UNLOCK button.

Temporary Shock Sensor Bypass

Bypassing Shock Sensor

Shock Sensor Programming/ Adjustment

Entering Programming - Method 1

Method 1 to enter shock sensor programming mode.

Entering Programming - Method 2

Method 2 to enter shock sensor programming mode.

Setting Sensitivity

Procedure for adjusting the shock sensor sensitivity.

Emergency Service Mode - (Valet Mode)

Activating Service Mode - Method 1

Deactivating Service Mode - Method 1

Activating Service Mode - Method 2

Deactivating Service Mode - Method 2

Diagnostics

Understanding Diagnostics

Diagnostics Chart

Car Jack Mode Operation

Emergency Override