Need help?Do you have a question about the ultracomfort UC556-MLA and is the answer not in the manual?
Chair stuck in lift/recline. Check if motor is running. Address issues with lift/descend function.
Motor not running. Check power connection, outlet, wiring for damage, and hand control function.
Motor runs but chair movement is partial. Inspect lift frame, push tube, gears, and fork head for damage.
Steps to replace the Smart Tek® hand control. Includes unplugging transformer and disconnecting cables.
Steps to replace the lift motor, involving removing pins, washers, and spacers from frame and straps.
Steps for removing and installing the arm assembly, requiring careful handling of the frame to avoid damage.
Procedure to replace the scissor mechanism, involving removing bolts and screws from seat and footboard.
Instructions for replacing the LM5124 lift frame cradle assembly, detailing disassembly and reassembly steps.
Step-by-step instructions for replacing Shiatsu massage unit components, including control box and extension wire.
General| Product Name | UltraComfort UC556-MLA |
|---|---|
| Category | Indoor Furnishing |
| Weight Capacity | 375 lbs |
| Seat Width | 20 inches |
| Seat Height | 19 inches |
| Seat Depth | 21 inches |
To Next Page