LiltraLite Madel 350/355 Owners Manual
14
4. Carefully lift the folded seat into the boot, and find a secure place to store it so it will not be damaged or damage the
vehicle (Figure 27).
5. Carefully return the battery pack to its holder at the rear of your vehicle. AVOID ANY METAL CONTACT WITH THE
BATTERY PACK TERMINALS!
6. Gently close the boot lid checking for any contact which may cause damage to the vehicle or automobile. Reposition
the vehicle if necessary.
Experiment to find the best positions for stowing your vehicle and its components. This may vary for different automobiles.
Padding may be necessary to protect the components from rubbing against each other.
REMOVING AND REASSEMBLING YOUR VEHICLE
1. Open your automobile’s boot and carefully remove the folded seat and battery pack. Place them on a solid surface
where they cannot trip you.
2. Put the protective pad over the lip of your automobile’s boot.
3. Carefully lift the rear of the vehicle over the automobile’s boot lip. Pivot the rear of the vehicle over the boot lip and
carefully lower it to the ground so the vehicle is leaning on the automobile (Figure
28).
4. Grasp the front frame handle of the vehicle, and gently lower the front of the vehicle to the ground.
5. Lift the vehicle’s tiller into riding position, unfold and install the seat being certain to insert the front frame legs into the
frame sockets. Check the seat latches to be sure they are secure. Lift the seat back, and unfold the seat arms (if
applicable).
6. Install the battery pack being certain that the latch is secure.
To Next Page
