12
3. Click on the Copy icon to open the window that contains the variables you
are adjusting.
4. Select the printer driver you want to use to print the copies, the type of
image you are scanning, the desired resolution, a scanning intensity level,
and the size of the scanned image, by clicking on the arrow to the right of
each field.
5. Click the OK button to save the Copy push button configuration settings.
These settings will be used whenever you press the Copy button on the front
of the scanner.
6. Push the Copy button. The scanner will start scanning process and
scan the image to specified printer software.
Configuring the Custom buttons Values
1. Click on the VistaAccess icon
in the control strip with one
mouse click. A pop -up menu as
shown on the right appears.
To Next Page
Loading...
Need help?
General
