EasyManua.ls Logo

UMI B07F1WPFZ8 - Time Defrost; Multi-Stage Cooking; Preset Function

Default Icon
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
7. Time Defrost
Press “Weight/Time Defrost” twice. The screen will display “dEF2”.
Turn “ ” to select the cooking time.
Press “Start/+30Sec./Confirm” key to start defrosting.
8. Multi-Stage Cooking
A maximum of two stages can be set. If one of the stages is used for defrosting, it should be put in
the first stage. After each stage completed, the buzzer will ring once and the next stage will begin.
Auto menu cannot be set as one of the stages.
Example: You want to defrost the food for 5 minutes, then cook it at 80% microwave power for
7 minutes. The steps are the following:
Press “Weight/Time Defrost” twice. The screen will display “dEF2”.
Turn “ ” to adjust the defrost time to 5 minutes.
Press “Micro./Grill/Combi.” once.
Turn “ ” to choose 80% microwave power until “P80” is displayed.
Press “Start/+30Sec./Confirm” to confirm.
Turn “ ” to adjust the cooking time to 7 minutes.
Press “Start/+30Sec./Confirm” to start cooking.
9. Preset Function
Set the clock first. (Refer to the instructions regarding setting the clock)
Input the microwave cooking programme. Only a maximum of two stages can be set.
Defrosting should not be set as preset function.
Example: You want to cook at 80% microwave power for 7 minutes.
Press “Micro./Grill/Combi.” once.
Turn “ ” to choose 80% microwave power until “P80” is displayed.
Press “Start/+30Sec./Confirm” to confirm.
Turn “ ” to adjust the cooking time to 7 minutes.
After the steps above have been done, please do not press “Start/+30Sec./Confirm”. Do the
following:
Press “Clock/Preset”. The hour digits will flash.
Turn “ ” to adjust the hour digits. Input time should be within 0--23.
Press “Clock/Preset”. The minute digits will flash.
NOTICE