UMLo N3 - Operation and Maintenance; Using the Vacuum Cleaner; Dust Box Cleaning

7 8
Battery Indicator
Please empty the trash of the dust box
and make sure the amount of the trash
is not over the Max Line.
Rotate the dust box and take it off.
Make sure completely dry before using
again.
Rinse the dust box with cold water.
Open the dust box to empty the trash.
- Three solid green lights: Full Power
- Two solid green lights: Medium Power
- One solid green light: Low Power
- One blinking green light: Needs a Recharge
Suction Mode Switch Button
Power Switch
Model NO.
Rated Voltage
Power Adapter Output
N3
22.2V
26.5V/500mA
Net Weight
Power Adapter Input
Battery Capacity
2.4lb
100-240V,50/60Hz
2200mAh
MAINTENANCE AND CLEANINGUSING
PRODUCT PARAMETER

1 2
3
5
4

2-1 Press the power switch to turn on the vacuum, press twice to change
to the Max mode, and then press it again to turn it off.
2-2 Press the Suction Mode Switch Button to switch the power suction
mode between MAX and MIN.
Push
1. Dust Box Cleaning