UNI-T UPO3000E Series - Page 13

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:SYSTem:COMMunicate:LAN:IPADdress
 Command format：
:SYSTem:COMMunicate:LAN:IPADdress <ip>
:SYSTem:COMMunicate:LAN:IPADdress?
 Functional description：
Set IP address, <ip> is belong to ASCII character string, the format is xxx.xxx.xxx.xxx.
 Return format：
Query return IP IP address.
 For example：
:SYST:COMM:LAN:IPAD "192.168.1.10" set IP address 192.168.1.10
:SYST:COMM:LAN:IPAD? query return 192.168.1.10
:SYSTem:COMMunicate:LAN:DHCP
 Command format：
:SYSTem:COMMunicate:LAN:DHCP {{1 | ON} | {0 | OFF}}
:SYSTem:COMMunicate:LAN:DHCP?
 Functional description：
To switch configuration mode（auto IP）and（manual IP）.
 Return format：
Query return dynamic configuration mode, 0 presents（manual IP）, 1 presents（auto IP）.
 For example：
:SYST:COMM:LAN:DHCP ON turn on IP dynamic configuration mode
:SYST:COMM:LAN:DHCP? query return 1
:SYSTem:COMMunicate:LAN:MAC?
 Command format：
:SYSTem:COMMunicate:LAN:MAC?
 Return format：
Query return MAC physical address
 For example：
:SYST:COMM:LAN:MAC? query return 00-2A-A0-AA-E0-56