UNI-T UPO3000E Series - Chapter 3 Horizontal System Settings; Horizontal Scale and Modes

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:CHANnel<n>:DISPlay
 Command format：
:CHANnel<n>:DISPlay { {1|ON} | {0|OFF} }
:CHANnel<n>:DISPlay?
 Functional description：
The switch setting of the specified channel.
 Return format：
Query return 1 or 0，it presents ON or OFF.
 For example：
:CHAN1:DISP ON turn on channel 1
:CHAN1:DISP? query return 1，it presents channel 1 is turn on
:CHANnel<n>:INVert
 Command format：
:CHANnel<n>:INVert { {1|ON} | {0|OFF} }
:CHANnel<n>:INVert?
 Functional description：
Turn on/off inversion display function, ON（turn on inversion display function）or OFF（waveform
normal display）.
 Return format：
Query return 1 or 0，it presents ON or OFF.
 For example：
:CHAN1:INV OFF turn off channel 1 inversion display function
:CHAN1:INV?
Query return 0，it presents channel 1 inversion display function is turn off
:CHANnel<n>:OFFSet
 Command format：
:CHANnel<n>:OFFSet <offset>
:CHANnel<n>:OFFSet?
 Functional description：
Set waveform offset on vertical position, <n> take value as 1/2/3/4/5, it presents {CH1/CH2/CH3/
CH4/ MATH }.
 Return format：
Query return offset value by scientific notation method，unit is V.
 For example：
:CHAN1:OFFS 20V set channel 1 vertical offset as 20V
:CHAN1:OFFS? query return 2.000e001