UNI-T UPO3000E Series - Nth Edge Trigger Setup

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:MEASure:VPP?
 Command format：
:MEASure:VPP? [<source>]
 Functional description：
Measuring peak-to-peak value of the specified channel waveform, <source> take value as
CHANnel1, CHANnel2, CHANnel3 and CHANnel4. Ignore means the current channel.
 Return format：
Query return 3.120e000，unit is V.
:MEASure:VMAX?
 Command format：
:MEASure:VMAX? [<source>]
 Functional description：
Measuring the maximum value of the specified channel waveform, <source> take value as
CHANnel1, CHANnel2, CHANnel3 and CHANnel4. Ignore means the current channel.
 Return format：
Query return2.120e000，unit is V.
:MEASure:VMIN?
 Command format：
:MEASure:VMIN? [<source>]
 Functional description：
Measuring the minimum value of the specified channel waveform, <source> take value as
CHANnel1, CHANnel2, CHANnel3 and CHANnel4. Ignore means the current channel.
 Return format：
Query return -2.120e000，unit is V.
:MEASure:VAMPlitude?
 Command format：
:MEASure:VAMPlitude? [<source>]
 Functional description：
Measuring the amplitude value of the specified channel waveform, <source> take value as
CHANnel1, CHANnel2, CHANnel3 and CHANnel4. Ignore means the current channel.
 Return format：
Query return3.120e000，unit is V.