UNI-T UPO3000E Series - Chapter 8 Display System Settings; Waveform Display Configuration; XY Mode and Lissajous Figures; Color Temperature Settings

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:TRIGger:SLOPe:TIME 1 set the time interval of slope trigger as 1s
:TRIGger:SLOPe:TIME? query return1.000e000
:TRIGger:SLOPe:THReshold
 Command format：
:TRIGger:SLOPe:THReshold {LOW|HIGH|LH}
:TRIGger:SLOPe:THReshold?
 Functional description：
Set the threshold mode of slope trigger.
 Return format：
Query return{LOW|HIGH|LH}.
 For example：
:TRIGger:SLOPe:THR HIGH set the threshold mode of slope trigger as HIGH
:TRIGger:SLOPe:THR? query return HIGH
Runt Trigger
:TRIGger:RUNT:QUALifier
 Command format：
:TRIGger:RUNT:QUALifier {GREaterthan | LESSthan | EQUal | NONE}
:TRIGger:RUNT:QUALifier?
 Functional description：
Set time term of low level, GREaterthan, LESSthan, EQUal and NONE.
 Return format：
Query return{GREaterthan | LESSthan | EQUal | NONE}.
 For example：
:TRIGger:RUNT:QUALifier GRE set the slope term as GREaterthan
:TRIGger:RUNT:QUALifier? query return GREaterthan
:TRIGger:RUNT:POLarity
 Command format：
:TRIGger:RUNT:POLarity {POSitive | NEGative}
:TRIGger:RUNT:POLarity?
 Functional description：
Set the polarity of low level, POSitive and NEGative.
 Return format：