To Next PageTo Next Page
Need help?Do you have a question about the UNI-T UT30B and is the answer not in the manual?
General| Product type | Digital multimeter |
|---|---|
| AC voltage range | 200 - 500 V |
| DC current range | 0.02 - 10 A |
| DC voltage range | 0.2 - 500 V |
| Basic accuracy (DC current) | ±(1%+2) |
| Basic accuracy (DC voltage) | ±(0.5%+2) |
| Basic accuracy (resistance) | ±(0.8%+2) |
| Dimensions (WxDxH) | 74 x 41 x 130 mm |
| Battery voltage | 9 V |
| Battery low indication | Yes |
Weight and Dimensions| Weight | 160 g |
|---|
Details the function and connection of the 'COM' input terminal.
Explains the 'V,ohm, mA' input terminal for voltage, resistance, and current measurements.
Covers the '10A MAX' input terminal for high current measurements.
Step-by-step guide for performing DC voltage measurements with the multimeter.
Instructions for performing AC voltage measurements using the multimeter.
Steps for measuring DC current, including essential safety warnings.
Procedure for measuring AC current, specifically for the UT30F model.
How to measure resistance, including necessary precautions and accuracy tips.
Steps for measuring diodes, covering safety precautions and result interpretation.
Instructions for measuring transistor hFE, detailing connection and conditions.
Procedure for measuring temperature using the UT30C model with a K-type thermocouple.
Details on using the square wave output feature of the UT30D model.
How to measure frequency using the UT30F model, including important precautions.
