9
UT501/UT502 OPERATING MANUAL
Warning
Do not use the Meter if it is damaged or metal part is exposed. Look for
cracks or missing plastic.
Be careful when working above 30V rms, 46.7V ac rms and 70V DC. Such
voltages pose a shock hazard.
Do not change battery when the Meter is in wet environment.
Place test leads in proper input terminals. Make sure all the test leads
are firmly connected to the Meterís input terminals.
Make sure the Meter is turned off when opening the battery compartment.
Carefully read the operating manual before operating the Meter.
Follow the operating manual all the time when using the Meter and keep
the operating manual in a safe place.
Wrong operation will cause incident and damage to the Meter.
To Next Page
Loading...
Need help?
General
