Need help?Do you have a question about the UNI-T UTG2025A and is the answer not in the manual?
General| Model | UTG2025A |
|---|---|
| Rated Voltage | 230V |
| Frequency | 50Hz |
| Starting System | Recoil Start |
| Engine Type | 4-stroke, OHV |
| Noise Level | 65 dB(A) at 7 m |
Lists the main specifications and capabilities of the UTG2000A waveform generator.
Defines terms like Warning, Caution, Danger used in the manual and on the product.
Lists and explains safety symbols found on the product itself.
Outlines initial procedures for verifying the instrument's status upon receipt.
Provides instructions on inspecting the instrument for shipping damage.
Lists the standard accessories included with the UTG2000A.
Details how to generate modulated waveforms like AM, FM, PM, ASK, FSK, PWM.
Details the process of setting up and using Frequency Modulation (FM) on the generator.
Guides users on configuring and applying Phase Modulation (PM) to waveforms.
Explains how to set up and use Amplitude-Shift Keying (ASK) modulation.
Details how to configure and utilize Frequency-Shift Keying (FSK) modulation.
Guides on setting up and generating Pulse Width Modulation (PWM) waveforms.
Explains how to generate frequency sweep waveforms.
Guides on generating burst waveforms with various cycle modes.
Details how to output arbitrary waveforms from internal or external memory.
Provides solutions for when the instrument screen remains blank.
Offers troubleshooting steps for situations with no waveform output.
Instructions for updating the instrument's firmware and software.
Provides general guidelines for instrument care and handling to prevent damage.
Instructions for safely cleaning the instrument's exterior and components.
To Next Page
