Chapter 1 Safety Information 2
1.1 Safety Terms and Symbols 2
1.2 General Safety Overview 2
Chapter 2 UTG9000C-II Series Introduction 3
2.1 Main Features 3
2.2 Output Characteristics 3
2.3 Panel and Keys Introduction 4
2.3.1 Front Panel 4
2.3.2 Back Panel 5
2.3.3 Function Interface 5
Chapter 3 Quick Start 6
3.1 General Inspection 6
3.1.1 Inspect Whether Damage is Caused by Transportation 6
3.1.2 Inspect Accessories 6
3.1.3 Inspect Complete Machine 6
3.2 Adjust The Handle 6
3.3 Output Basic Waveform 6
3.3.1 Set Output Frequency 6
3.3.2 Set Output Amplitude 6
3.3.3 Set DC Offset Voltage 7
3.3.4 Set Phase 7
3.3.5 Set Pulse Wave Duty Ratio 7
3.3.6 Set Ramp Duty 7
3.3.7 Set DC Voltage 7
3.3.8 Set Noise Wave 7
3.4 System Settings 7
----------------------------------------------------------
-------------------------------------------------------
----------------------------------------------------------
--------------------------------------
-----------------------------------------------------------------------
-------------------------------------------------------------
-----------------------------------------------------
-------------------------------------------------------------------------
-------------------------------------------------------------------------
----------------------------------------------------------------
------------------------------------------------------------------
-----------------------------------------------------------------
---------------
-------------------------------------------------------------
----------------------------------------------------
------------------------------------------------------------------
-----------------------------------------------------------
-----------------------------------------------------------
------------------------------------------------------------
-----------------------------------------------------------
--------------------------------------------------------------------------
----------------------------------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
-------------------------------------------------------------------
---------------------------------------------------------------------
3.4.1 Output Impedance settings ---------------------------------------------------- 7
3.4.2 Screen Brightness --------------------------------------------------------------- 7
Contents
3.4.3 Key Sound ------------------------------------------------------------------------ 7
3.4.4 Factory Settings ----------------------------------------------------------------- 7
3.5 Count --------------------------------------------------------------------------------- 8
Chapter 4 Advanced Applications ---------------------------------------------------8
4.1 Output Modulation Waveform ---------------------------------------------------8
4.1.1 Amplitude Modulation (AM) --------------------------------------------------- 8
4.1.2 Frequency Modulation (FM) ------------------------------------------------ 12
4.2 Output Frequency Sweep Waveform --------------------------------------- 15
4.2.1 Select Frequency Sweep ---------------------------------------------------- 15
4.2.2 Set Start and Stop Frequency ---------------------------------------------- 15
4.2.3 Frequency Sweep Mode ----------------------------------------------------- 16
4.2.4 Frequency Sweep Time ------------------------------------------------------ 16
4.2.5 Select Trigger Source -------------------------------------------------------- 16
4.2.6 Comprehensive Example ---------------------------------------------------- 16
4.3 Output Arbitrary Wave ---------------------------------------------------------- 18
4.3.1 Enable Arbitrary Wave Function ------------------------------------------- 18
4.3.2 Select Arbitrary Wave -------------------------------------------------------- 18
4.4 Power Amplifier Output --------------------------------------------------------- 18
Chapter 5 Fault Handling ----------------------------------------------------------- 18
5.1 No Display on Screen (Blank Screen) -------------------------------------- 18
5.2 No Waveform Output ----------------------------------------------------------- 18
Chapter 6 Service and Support --------------------------------------------------- 19
6.1 Warranty Overview -------------------------------------------------------------- 19
6.2 Contact Us ------------------------------------------------------------------------- 19
Appendix A: Factory Reset State ------------------------------------------------- 20
Appendix B: Performance Index -------------------------------------------------- 21
Appendix C: List of Accessories --------------------------------------------------- 24
Appendix D: Maintenance and Cleaning ---------------------------------------- 24
Appendix E: Chinese-English Parameter Comparison Table -------------- 25
UTG9000C-II User Manual
To Next Page
Loading...
